Latest training guide for Network Appliance NS0-502

Education degree does not equal strength, and it does not mean ability. Education degree just mean that you have this learning experience only. And the real ability is exercised in practice, it is not necessarily linked with the academic qualifications. Do not feel that you have no ability, and don't doubt yourself. When you choose to participate in the Network Appliance NS0-502 exam, it is necessary to pass it. If you are concerned about the test, however, you can choose ITCertKing's Network Appliance NS0-502 exam training materials. No matter how low your qualifications, you can easily understand the content of the training materials. And you can pass the exam successfully.

ITCertKing's products are developed by a lot of experienced IT specialists using their wealth of knowledge and experience to do research for IT certification exams. So if you participate in Network Appliance certification NS0-502 exam, please choose our ITCertKing's products, ITCertKing can not only provide you a wide coverage and good quality exam information to guarantee you to let you be ready to face this very professional exam but also help you pass Network Appliance certification NS0-502 exam to get the certification.

ITCertKing is the best catalyst to help IT personage be successful. Many people who have passed some IT related certification exams used our ITCertKing's training tool. Our ITCertKing expert team use their experience for many people participating in Network Appliance certification NS0-502 exam to develope the latest effective training tools, which includes Network Appliance NS0-502 certification simulation test, the current exam and answers . Our ITCertKing's test questions and answers have 95% similarity with the real exam. With ITCertKing's training tool your Network Appliance certification NS0-502 exams can be easy passed.

Perhaps you have also seen the related training tools about Network Appliance certification NS0-502 exam on other websites, but our ITCertKing has a pivotal position in the field of IT certification exam. ITCertKing research materials can 100% guarantee you to pass the exam. With ITCertKing your career will change and you can promote yourself successfully in the IT area. When you select ITCertKing you'll really know that you are ready to pass Network Appliance certification NS0-502 exam. We not only can help you pass the exam successfully, but also will provide you with a year of free service.

In the information era, IT industry is catching more and more attention. In the society which has a galaxy of talents, there is still lack of IT talents. Many companies need IT talents, and generally, they investigate IT talents's ability in according to what IT related authentication certificate they have. So having some IT related authentication certificate is welcomed by many companies. But these authentication certificate are not very easy to get. Network Appliance NS0-502 is a quite difficult certification exams. Although a lot of people participate in Network Appliance NS0-502 exam, the pass rate is not very high.

Network Appliance NS0-502 certificate can help you a lot. It can help you improve your job and living standard, and having it can give you a great sum of wealth. Network Appliance certification NS0-502 exam is a test of the level of knowledge of IT professionals. ITCertKing has developed the best and the most accurate training materials about Network Appliance certification NS0-502 exam. Now ITCertKing can provide you the most comprehensive training materials about Network Appliance NS0-502 exam, including exam practice questions and answers.

Exam Code: NS0-502
Exam Name: Network Appliance (NetApp Certified Implementation Engineer-SAN and Virtualization)
One year free update, No help, Full refund!
Total Q&A: 106 Questions and Answers
Last Update: 2013-10-10

NS0-502 Free Demo Download: http://www.itcertking.com/NS0-502_exam.html

NO.1 A company has a Fibre Channel environment and wants to connect a new host in a remote data
center using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A. 50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B. 50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C. 50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D. 50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer: D

Network Appliance   NS0-502   NS0-502

NO.2 Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol.
Based on the information provided in the table, which action will the storage controller take when it runs
out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C

Network Appliance exam prep   NS0-502   NS0-502 answers real questions   NS0-502 braindump

NO.3 A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A

Network Appliance pdf   NS0-502 exam   NS0-502   NS0-502   NS0-502 braindump

NO.4 A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume.
LUN reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are
disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
A. 200 GB
B. 300 GB
C. 400 GB
D. 500 GB
Answer: B

Network Appliance study guide   NS0-502 test   NS0-502

NO.5 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D

Network Appliance   NS0-502 test answers   NS0-502 braindump   NS0-502 original questions   NS0-502 exam dumps

NO.6 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B

Network Appliance braindump   NS0-502   NS0-502

NO.7 What would you use to share a data LUN among multiple servers where each server has simultaneous
write access?
A. host-based BootBIOS
B. host-based multipathing
C. host-based volume manager
D. host-based clustered file system
Answer: D

Network Appliance   NS0-502   NS0-502 certification

NO.8 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C

Network Appliance test questions   NS0-502   NS0-502   NS0-502

NO.9 Click the Exhibit button.
You see the following error on the storage controller's console or messages file.
What is the most likely cause for this error?
A. portal group misconfiguration
B. iSCSI CHAP misconfiguration
C. iSNS misconfiguration
D. IPsec misconfiguration
Answer: B

Network Appliance   NS0-502 answers real questions   NS0-502   NS0-502

NO.10 What are three relevant perfstat counters to check for unaligned I/O that do not fall on the WAFL
boundary? (Choose three.)
A. wp.partial_write
B. vvol_read.io_valid
C. read/write_align_histo.XX
D. read/write_partial_blocks.XX
E. xinode content misses
Answer: ACD

Network Appliance test answers   NS0-502   NS0-502

NO.11 Which FC SAN topology provides the best performance and scalability?
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B

Network Appliance pdf   NS0-502 certification   NS0-502 certification   NS0-502   NS0-502 dumps

NO.12 Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will
be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the
WWPN of the old HBA.
Answer: D

Network Appliance exam dumps   NS0-502 demo   NS0-502   NS0-502

NO.13 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance practice test   NS0-502 exam dumps   NS0-502   NS0-502 demo   NS0-502

NO.14 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. full mesh
B. core-edge
C. full cascade
D. partial mesh
Answer: B

Network Appliance   NS0-502 braindump   NS0-502 answers real questions   NS0-502 exam   NS0-502

NO.15 Which three protocols can be used for communications between a host running SnapDrive for
Windows and the NetApp Storage Controllers? (Choose three.)
A. http:
B. https:
C. ftp:
D. RPC
E. ssh
Answer: ABD

Network Appliance   NS0-502 braindump   NS0-502 practice test   NS0-502 practice test

NO.16 Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f
ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D

Network Appliance   NS0-502   NS0-502   NS0-502 exam

NO.17 A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the
LUN. The current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is
deleted from the LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
A. 50% on the host, 100% on the disk array
B. 100% on the host, 50% on the disk array
C. 50% on the host, 50% on the disk array
D. 100% on the host, 100% on the disk array
Answer: A

Network Appliance answers real questions   NS0-502   NS0-502 original questions   NS0-502

NO.18 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A. SnapMover and Fibre Channel at the disaster recovery site for all hosts
B. SnapMirror and iSCSI at the disaster recovery site for all hosts
C. Fibre Channel at both locations using ftp to replicate storage
D. MetroCluster and NAS
Answer: B

Network Appliance demo   NS0-502   NS0-502 original questions

NO.19 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance exam simulations   NS0-502   NS0-502   NS0-502   NS0-502

NO.20 Any newly installed system with Data ONTAP 7.3.1 supports which cfmode?
A. dual_fabric only
B. single_image
C. partner
D. mixed
Answer: B

Network Appliance   NS0-502 braindump   NS0-502   NS0-502   NS0-502 exam dumps

ITCertKing offer the latest 100-101 exam material and high-quality 000-224 pdf questions & answers. Our 70-481 VCE testing engine and 000-087 study guide can help you pass the real exam. High-quality MB6-870 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/NS0-502_exam.html