ITCertKing Juniper JN0-201 exam practice questions and answers

ITCertKing have a huge senior IT expert team. They use their professional IT knowledge and rich experience to develop a wide range of different training plans which can help you pass Juniper certification JN0-201 exam successfully. In ITCertKing you can always find out the most suitable training way for you to pass the exam easily. No matter you choose which kind of the training method, ITCertKing will provide you a free one-year update service. ITCertKing's information resources are very wide and also very accurate. When selecting ITCertKing, passing Juniper certification JN0-201 exam is much more simple for you.

We are committed to using ITCertKing Juniper JN0-201 exam training materials, we can ensure that you pass the exam on your first attempt. If you are ready to take the exam, and then use our ITCertKing Juniper JN0-201 exam training materials, we guarantee that you can pass it. If you do not pass the exam, we can give you a refund of the full cost of the materials purchased, or free to send you another product of same value.

The person who has been able to succeed is because that he believed he can do it. ITCertKing is able to help each IT person, because it has the capability. ITCertKing Juniper JN0-201 exam training materials can help you to pass the exam. Any restrictions start from your own heart, if you want to pass the Juniper JN0-201 examination, you will choose the ITCertKing.

ITCertKing ensure that the first time you take the exam will be able to pass the exam to obtain the exam certification. Because ITCertKing can provide to you the highest quality analog Juniper JN0-201 Exam will take you into the exam step by step. ITCertKing guarantee that Juniper JN0-201 exam questions and answers can help you to pass the exam successfully.

Exam Code: JN0-201
Exam Name: Juniper (Juniper networks Certified internet associate.m(jncia-m))
One year free update, No help, Full refund!
Total Q&A: 120 Questions and Answers
Last Update: 2013-10-24

To choose our ITCertKing to is to choose success! ITCertKing provide you Juniper certification JN0-201 exam practice questions and answers, which enable you to pass the exam successfully. Simulation tests before the formal Juniper certification JN0-201 examination are necessary, and also very effective. If you choose ITCertKing, you can 100% pass the exam.

ITCertKing have a professional IT team to do research for practice questions and answers of the Juniper JN0-201 exam certification exam. They provide a very effective training tools and online services for your. If you want to buy ITCertKing products, ITCertKing will provide you with the latest, the best quality and very detailed training materials as well as a very accurate exam practice questions and answers to be fully prepared for you to participate in the Juniper certification JN0-201 exam. Safely use the questions provided by ITCertKing's products. Selecting the ITCertKing is equal to be 100% passing the exam.

I believe that a lot of people working in the IT industry hope to pass some IT certification exams to obtain the corresponding certifications. Some IT authentication certificates can help you promote to a higher job position in this fiercely competitive IT industry. Now the very popular Juniper JN0-201 authentication certificate is one of them. Although passing the Juniper certification JN0-201 exam is not so easy, there are still many ways to help you successfully pass the exam. While you can choose to spend a lot of time and energy to review the related IT knowledge, and also you can choose a effective training course. ITCertKing can provide the pertinent simulation test,which is very effective to help you pass the exam and can save your precious time and energy to achieve your dream. ITCertKing will be your best choice.

JN0-201 Free Demo Download: http://www.itcertking.com/JN0-201_exam.html

NO.1 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper   JN0-201 answers real questions   JN0-201 pdf

NO.2 Three IS-IS routers on a broadcast segment have different priority values configured. Which router is
elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B

Juniper   JN0-201   JN0-201   JN0-201 study guide

NO.3 If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B

Juniper   JN0-201 questions   JN0-201 practice test   JN0-201 original questions   JN0-201   JN0-201 certification training

NO.4 What is the first step in BGP route selection?
A. The local router prefers the route with the shortest AS_PATH.
B. The router first verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
Answer: B

Juniper test   JN0-201 certification   JN0-201 practice test

NO.5 A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD

Juniper test answers   JN0-201   JN0-201 test   JN0-201 exam simulations

NO.6 By default, which command can be used to display information about packets that have been logged
with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C

Juniper certification training   JN0-201   JN0-201   JN0-201

NO.7 Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these
routers?
A. An Adjacency forms.
B. An Adjacency does not form.
C. An Adjacency forms but traffic is not forwarded.
D. No IS-IS PDUs are sent.
Answer: A

Juniper   JN0-201 dumps   JN0-201 answers real questions   JN0-201

NO.8 How often are IS-IS Hello packets transmitted?
A. 3 seconds for DIS; 9 seconds for non-DIS
B. 9 seconds for DIS; 3 seconds for non-DIS
C. 10 seconds for DIS; 3 seconds for non-DIS
D. 10 seconds for all routers
Answer: A

Juniper braindump   JN0-201 exam dumps   JN0-201 original questions

NO.9 What are the three components of the ISO NET address? (Choose three.)
A. Area ID
B. N-selector
C. System ID
D. AS number
E. ISO number
F. MAC address
Answer: ABC

Juniper certification training   JN0-201 test   JN0-201   JN0-201

NO.10 Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD

Juniper   JN0-201 exam dumps   JN0-201 practice test   JN0-201

NO.11 Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A

Juniper certification   JN0-201   JN0-201 braindump   JN0-201   JN0-201 practice test

NO.12 What command would you use to view an IS-IS adjacency?
A. show iso neighbor
B. show isis neighbor
C. show iso adjacency
D. show isis adjacency
Answer: D

Juniper   JN0-201   JN0-201 test   JN0-201   JN0-201

NO.13 How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and
Level 2 adjacency?
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
Answer: A

Juniper   JN0-201 original questions   JN0-201   JN0-201 exam simulations   JN0-201 certification   JN0-201

NO.14 What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B

Juniper practice test   JN0-201 answers real questions   JN0-201 test   JN0-201   JN0-201   JN0-201

NO.15 What are two ways that a valid IBGP peering session can be configured? (Choose two.)
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
Answer: BC

Juniper certification training   JN0-201 certification training   JN0-201   JN0-201   JN0-201

NO.16 Assume that a comparable configuration is applied to your peer in AS 11 and that bi-directional TCP
reachability has been achieved. Which EBGP configuration will allow the BGP session to become
established?
A. routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external;
neighbor 10.0.3.6 { peer-as 11; } } }
B. routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external;
peer-as 11;{ neighbor 10.0.3.6; } }
C. routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 { type external;
peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer-as 64;{ neighbor
10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } }
D. routing-options { }
E. routing-options { autonomous-system 64; }
F. routing-options { autonomous-system 64; }
G. routing-options { autonomous-system 64; } protocols {
H. routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp
{ group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp
{ group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101
{ peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } }
group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } } } } }
Answer: A

Juniper dumps   JN0-201 test questions   JN0-201   JN0-201   JN0-201 certification

NO.17 What are two purposes of the AS_PATH attribute? (Choose two.)
A. route selection
B. loop avoidance
C. determining equal cost paths for reachablilty
D. defining the application of other BGP attributes
Answer: AB

Juniper   JN0-201 study guide   JN0-201 dumps   JN0-201 test answers   JN0-201

NO.18 During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the
database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C

Juniper   JN0-201   JN0-201 practice test   JN0-201 test

NO.19 Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Keepalive
E. Notification
Answer: A

Juniper certification   JN0-201 dumps   JN0-201 certification   JN0-201 answers real questions   JN0-201 exam dumps

NO.20 What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B

Juniper test questions   JN0-201   JN0-201   JN0-201

ITCertKing offer the latest 000-124 exam material and high-quality 100-101 pdf questions & answers. Our JN0-360 VCE testing engine and VCP-510 study guide can help you pass the real exam. High-quality 700-104 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-201_exam.html