Symantec certification ST0-237 exam training materials

ITCertKing's Symantec ST0-237 exam training materials is virtually risk-free for you at the time of purchase. Before you buy, you can enter ITCertKing website to download the free part of the exam questions and answers as a trial. So you can see the quality of the exam materials and we ITCertKingis friendly web interface. We also offer a year of free updates. If you do not pass the exam, we will refund the full cost to you. We absolutely protect the interests of consumers. Training materials provided by ITCertKing are very practical, and they are absolutely right for you. We can make you have a financial windfall.

Now, you should do need to get the exam question sets from year to year and reference materials that is related to Symantec ST0-237 certification exam. Busying at work, you must not have enough time to prepare for your exam. So, it is very necessary for you to choose a high efficient reference material. What's more important, you should select a tool that suits you, which is a problem that is related to whether you can pass your exam successfully. Therefore, try ITCertKing Symantec ST0-237 practice test dumps.

Exam Code: ST0-237
Exam Name: Symantec (Symantec Data Loss Prevention 12 Technical Assessment)
One year free update, No help, Full refund!
Total Q&A: 300 Questions and Answers
Last Update: 2014-01-19

There is no reason to waste your time on a test. If you feel it is difficult to prepare for Symantec ST0-237 and need spend a lot of time on it, you had better use ITCertKing test dumps which will help you save lots of time. What's more, ITCertKing exam dumps can guarantee 100% pass your exam. There is no better certification training materials than ITCertKing dumps. Instead of wasting your time on preparing for ST0-237 exam, you should use the time to do significant thing. Therefore, hurry to visit ITCertKing.com to know more details. Miss the opportunity, you will regret it.

In order to meet the needs of each candidate, the team of IT experts in ITCertKing are using their experience and knowledge to improve the quality of exam training materials constantly. We can guarantee that you can pass the Symantec ST0-237 exam the first time. If you buy the goods of ITCertKing, then you always be able to get newer and more accurate test information. The coverage of the products of ITCertKing is very broad. It can be provide convenient for a lot of candidates who participate in IT certification exam. Its accuracy rate is 100% and let you take the exam with peace of mind, and pass the exam easily.

The IT expert team use their knowledge and experience to make out the latest short-term effective training materials. This training materials is helpful to the candidates. It allows you to achieve the desired results in the short term. Especially those who study while working, you can save a lot of time easily. ITCertKing's training materials are the thing which you most wanted.

ITCertKing's expert team use their experience and knowledge to study the examinations of past years and finally have developed the best training materials about Symantec certification ST0-237 exam. Our Symantec certification ST0-237 exam training materials are very popular among customers and this is the result ofITCertKing's expert team industrious labor. The simulation test and the answer of their research have a high quality and have 95% similarity with the true examination questions. ITCertKing is well worthful for you to rely on. If you use ITCertKing's training tool, you can 100% pass your first time to attend Symantec certification ST0-237 exam.

ITCertKing's training product for Symantec certification ST0-237 exam includes simulation test and the current examination. On Internet you can also see a few websites to provide you the relevant training, but after compare them with us, you will find that ITCertKing's training about Symantec certification ST0-237 exam not only have more pertinence for the exam and higher quality, but also more comprehensive content.

ST0-237 Free Demo Download: http://www.itcertking.com/ST0-237_exam.html

NO.1 You need to create a new volume. The new volume will only use disks on controller 1. You
want to execute the vxassist command with the ctlr:c1 storage attribute. You want to ensure that
the command provides desired output.
What should you ensure to meet the required goal?
A. Ensure that storage attribute is a part of the disk group.
B. Ensure that storage attribute is a part of the plex.
C. Ensure that storage attribute is a part of the disk.
D. Ensure that storage attribute is a part of the volume.
Answer: A

Symantec   ST0-237 answers real questions   ST0-237 exam simulations   ST0-237

NO.2 An incorrectable I/O error has occurred on a RAID volume due to a disk failure that caused
the data on the disk to become unavailable. For the RAID volume, the subdisk becomes unavailable
and is considered stale and detached.What is the RAID level in the volume in this situation?
A. 0
B. 2
C. 4
D. 5
Answer: D

Symantec practice test   ST0-237   ST0-237 test questions   ST0-237 test

NO.3 An information security officer has detected an unauthorized tool on desktops being used to
transmit data with encrypted communications.
Which Symantec Data Loss Prevention feature should the information security officer use to prevent
this tool from accessing confidential data?
A. removable storage monitoring
B. network protocol monitoring
C. application path filtering
D. application monitoring
Answer: D

Symantec braindump   ST0-237   ST0-237 study guide   ST0-237   ST0-237

NO.4 You need to create a volume for the HR department. You need to mount a file system with a
high demand for I/O throughput. You are aware that spanning the volume across multiple disks will
increase the I/O performance.Which risk should you be aware of when spanning the volume across
multiple disks?
A. Write throughput degradation
B. Single disk failure causes volume failure
C. Requirement for disk redundancy
D. Poor I/O performance
Answer: B

Symantec exam simulations   ST0-237   ST0-237 demo   ST0-237 pdf

NO.5 An incident responder is viewing a discover incident snapshot and needs to determine which
information to provide to the next level responder.Which information would be most useful in
assisting the next level responder with data clean-up?
A. Incident Details: Message Body content
B. Custom Attributes: Most Active User from Data Insight
C. Incident Details: File Owner metadata
D. Access Information: File Permissions
Answer: B

Symantec dumps   ST0-237 braindump   ST0-237 answers real questions

NO.6 You have a nonredundant concatenated volume named datavol in a disk group named datadg.
The volume has a file system on it. One of the underlying disks of the volume called datadg02 fails
temporarily due to a power failure. You fix the problem of the power failure, and ensure that the
disk is powered back again. You ensure that both the system and VxVM can see the disk again. Then,
you reattach the disk back to the disk media record.
Which command will you execute next to be able to run fsck on the file system?
A. vxvol -g datadg start datavol
B. vxrecover -s datavol
C. vxrecover -ns
D. vxvol -g datadg -f start datavol
Answer: D

Symantec   ST0-237 test   ST0-237 answers real questions   ST0-237   ST0-237 exam dumps

NO.7 Which two locations can the administrator verify a newly created policy was loaded on a
detection server? (Select two.)
A. System > Servers > Overview
B. System > Servers > Server Detail
C. Manage > Policies > Policy List
D. System > Servers > Overview > Configure Server
E. System > Servers > Events
Answer: B,E

Symantec exam simulations   ST0-237 certification   ST0-237 braindump   ST0-237 exam dumps   ST0-237

NO.8 When you attempt to start the RAID-5 volume, you are prompted with an error message
"VxVM ERROR V-5-1-1237 Volume r5vol is not startable; some subdisks are unusable and the parity
is stale." You want to remove this error and start the RAID-5 volume.
How will you ensure that you do not encounter this error again?
A. Use a single RAID-5 log plex in RAID-5 volumes.
B. Change the subdisks.
C. Use two or more RAID-5 log plexes in RAID-5 volumes.
D. Reattach the subdisks.
Answer: C

Symantec   ST0-237 dumps   ST0-237   ST0-237 demo

NO.9 After installing Veritas Enterprise Administrator, you start the VEA with the profile name that
you have specified.When you click the Console View, what does it display? (Select two.)
A. Active Events
B. Volume Summary
C. Alerts
D. Disk History
Answer: A,C

Symantec   ST0-237   ST0-237   ST0-237 questions   ST0-237 answers real questions

NO.10 Which rule will you use to discover disabled controllers failures in the Storage Foundation
5.0 environment?
A. vxse_host
B. vxse_disk
C. vxse_disklog
D. vxse_dc_failures
Answer: D

Symantec certification   ST0-237 practice test   ST0-237 exam   ST0-237 braindump

NO.11 A DLP administrator needs to forward data loss incidents to the company's Security
Information and Event Management (SIEM) system.Which response rule action provides the
administrator with the ability to accomplish this task?
A. All: Send Email Notification
B. All: Log to a Syslog Server
C. All: Add Note
D. All: Set Attribute
Answer: B

Symantec   ST0-237   ST0-237 exam dumps   ST0-237   ST0-237   ST0-237

NO.12 What is the minimum percentage of spare disks in a disk group?
A. 10%
B. 15%
C. 20%
D. 25%
Answer: A

Symantec original questions   ST0-237   ST0-237   ST0-237 test   ST0-237 test answers

NO.13 Which valid automated response option should an administrator choose for Email Prevent?
A. modify the message subject or add specific RFC-2822 headers
B. add metadata to email headers of confidential email
C. modify the body of email messages containing confidential data
D. process confidential email re-routed to a specified email list
Answer: A

Symantec   ST0-237   ST0-237 exam prep   ST0-237 test questions

NO.14 You have a system that has two disks-disk01 and disk02, which are mapped into the system
configuration during boot as disks c0t0d0s2 and c0t1d0s2, respectively. A failure has caused disk01
to become detached.What would you do to view the status of the failed disk01?
A. Use the vxdg list command
B. Use the vxdg -s list command
C. Use the vxprint command
D. Use the vxdisk list command
Answer: D

Symantec pdf   ST0-237   ST0-237

NO.15 You are managing a Storage Foundation 5.0 server that has Storage Foundation Management
Server (SFMS) software installed. You force a placement policy to a file system using the Storage
Foundation Management Server (SFMS).
What is the outcome when a policy is forced to a file system?
A. The current policies of the file system are overwritten by the SFMS policies.
B. The file system will retain its policies and discard the SFMS policies.
C. The file system will incorporate the changes of both the policies.
D. The file system will apply the SFMS policies only in the case where its own policies cannot be
assigned.
Answer: A

Symantec   ST0-237   ST0-237 demo   ST0-237   ST0-237 answers real questions   ST0-237

NO.16 A system administrator has a large amount of data that is not being accessed on the
company's storage devices. This excess amount of data is causing slow access to the active data. You
want to set up automatic relocation of data so that data expires as per its defined age.
What should you do?
A. Use the Data Movement Service (DMS) to set the threshold for automatic relocation of data.
B. Use the Quality of Storage Service (QoSS) to set the threshold for automatic relocation of data.
C. Use the Virtual Data Aging Service (VDAS) to set the threshold automatic relocation of data.
D. Use the Intelligent Volume Service (IVS) to set the threshold for automatic relocation of data.
Answer: B

Symantec   ST0-237 study guide   ST0-237   ST0-237 exam simulations

NO.17 In System Overview, the status of a detection server is shown as 'unknown'. Examination of
the detection server reveals all Vontu services are running.
Which port is blocked and causing the server to be in the 'unknown' state?
A. 443
B. 8000
C. 8100
D. 8300
Answer: C

Symantec   ST0-237 questions   ST0-237 test   ST0-237 practice test   ST0-237 exam simulations

NO.18 Which is a limitation of using CDS disk layout under VxVM 4.0 or above?
A. The CDS format cannot contain a private region and a public region on a single partition.
B. The CDS format cannot be used with hardware RAID controllers.
C. The CDS format cannot be used in conjunction with OS-level partitioning.
D. The CDS format cannot be used for boot disks.
Answer: D

Symantec test   ST0-237   ST0-237 test questions   ST0-237   ST0-237 exam

ITCertKing offer the latest JN0-533 exam material and high-quality NS0-145 pdf questions & answers. Our ICGB VCE testing engine and ICYB study guide can help you pass the real exam. High-quality 74-409 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/ST0-237_exam.html