HP0-Y36 exam dumps

If you buy ITCertKing HP HP0-Y36 exam training materials, you will solve the problem of your test preparation. You will get the training materials which have the highest quality. Buy our products today, and you will open a new door, and you will get a better future. We can make you pay a minimum of effort to get the greatest success.

ITCertKing site has a long history of providing HP HP0-Y36 exam certification training materials. It has been a long time in certified IT industry with well-known position and visibility. Our HP HP0-Y36 exam training materials contains questions and answers. Our experienced team of IT experts through their own knowledge and experience continue to explore the exam information. It contains the real exam questions, if you want to participate in the HP HP0-Y36 examination certification, select ITCertKing is unquestionable choice.

ITCertKing is a very good website for HP certification HP0-Y36 exams to provide convenience. According to the research of the past exam exercises and answers, ITCertKing can effectively capture the content of HP certification HP0-Y36 exam. ITCertKing's HP HP0-Y36 exam exercises have a very close similarity with real examination exercises.

If you do not know how to pass the exam more effectively, I'll give you a suggestion is to choose a good training site. This can play a multiplier effect. ITCertKing site has always been committed to provide candidates with a real HP HP0-Y36 certification exam training materials. The ITCertKing HP HP0-Y36 Certification Exam software are authorized products by vendors, it is wide coverage, and can save you a lot of time and effort.

Exam Code: HP0-Y36
Exam Name: HP (Deploying HP Enterprise Networks)
One year free update, No help, Full refund!
Total Q&A: 73 Questions and Answers
Last Update: 2013-12-08

HP0-Y36 Free Demo Download: http://www.itcertking.com/HP0-Y36_exam.html

NO.1 Click the Exhibit button.
A provider of MPLS services offers multiple types of MPLS-based VPNs to its customers. Provider Edge
router PE-1 directly connects to the following three customers:
What is the minimum number of LDP peers established on Router PE-1?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: B

HP   HP0-Y36   HP0-Y36   HP0-Y36 pdf

NO.2 Which technology in an MPLS L2VPN can provide ordered delivery of Ethernet frames?
A. TCP-based L2VPN
B. Control Word
C. Ethernet raw access circuit
D. VLAN pseudowire class
E. MPLS EXP bits
Answer: B

HP   HP0-Y36   HP0-Y36 certification   HP0-Y36

NO.3 Which BGP attributes must be present in a BGP routing update? (Select three.)
A. community
B. MED
C. origin type
D. local preference
E. AS path
F. next hop
Answer: C,E,F

HP study guide   HP0-Y36 pdf   HP0-Y36 test   HP0-Y36 test answers

NO.4 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected. The address blocks chosen by the customers for
each site are:
The provider has established only four Multi-Protocol BGP peers as shown in the exhibit. PE-4 has no
customer connections. Neither MPLS L3VPN is functional. Which configuration steps are required if this
topology is to be operational for both customers.? (Select two.)
A. Create VPN instances Customer A and Customer B on PE-4.
B. Configure PE-4 as a route-reflector within the bgp l3vpn-family.
C. Configure PE-4 as a route-reflector within the ipv4-family vpnv4.
D. Configure PE-4 as a route-reflector within the ipv4-family vpn-instance Cust-A and vpn-instance
Customer B.
E. Configure PE-4 as a bgp route-reflector.
F. Configure MBGP peers for P-10, P-20, and P-30.
Answer: A,C

HP   HP0-Y36   HP0-Y36 questions   HP0-Y36 practice test   HP0-Y36 pdf

NO.5 Which characteristics of a Circuit Cross Connect (CCC) L2VPN distinguish it from the Martini or
Kompella versions? (Select two.)
A. It requires a stack of three MPLS labels.
B. It includes exactly two endpoints of the VPN.
C. It can operate with fewer than two MPLS labels.
D. It does not require any Label signaling.
Answer: C,D

HP original questions   HP0-Y36   HP0-Y36 practice test   HP0-Y36 test   HP0-Y36

NO.6 What can be included in BGP or multi-protocol BGP Network Layer Reachability Information (NLRI)?
(Select three.)
A. AS 65001
B. 10.0.0.0 /9
C. MED
D. Remote LDP Session
E. BGP ORF
F. VPN Target
G. VPLS Label Block
H. 6500:301:192.168.0.0 /16
Answer: B,G,H

HP certification training   HP0-Y36 test questions   HP0-Y36 answers real questions   HP0-Y36

NO.7 Which parameters must be configured on two PE routers to provision an Ethernet L2VPN in Martini
mode? (Select four.)
A. PW-ID
B. LDP Remote Peer
C. VPN Instance
D. Service Instance
E. S-VID
F. L2VPN Address Family
G. Route Distinguisher
H. IP Binding
Answer: A,B,D,E

HP demo   HP0-Y36   HP0-Y36   HP0-Y36 test   HP0-Y36

NO.8 In the configuration of a Martini version L2VPN on two PE routers, which parameter must be identical?
A. S-VID
B. PW-ID
C. VLAN-ID
D. Service Instance number
E. VPN-Target
F. Remote LDP Peer IP address
Answer: B

HP exam simulations   HP0-Y36   HP0-Y36

NO.9 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected. The address blocks chosen by the customers for
each site are:
The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the
MPLS LSR-ID. Customer A Site 1 successfully pings Customer A Site 2. This ICMP echo request is
captured on the Ethernet segment between routers P-10 and P-20. What is found on this packet capture?
(Select two.)
A. MPLS VPN label
B. VPN target
C. MPLS outer label corresponding to the LSR-ID of P-20
D. MPLS outer label corresponding to FEC 16.0.0.2
E. route distinguisher
Answer: A,D

HP study guide   HP0-Y36   HP0-Y36 pdf   HP0-Y36 pdf   HP0-Y36 certification training

NO.10 Click the Exhibit button.
Router-1 and Router-2 are BGP peers. Router-2 and Router-3 are BGP peers. However, Router-3 has not
learned the 16.0.0.0/8 BGP route. How can you resolve this issue? (Select two.)
A. Enable IGP synchronization on all routers.
B. Prepend AS1 to the 16.0.0.0/8 route on Router-1.
C. Enable BGP peering between Router-1 and Router-3.
D. Adjust the local preference of 16.0.0.0/8 on Router-1.
E. Configure Router-2 as a route reflector and Router-1 and Router-3 as clients.
F. Establish a physical link between Router-1 and Router-3.
Answer: C,E

HP   HP0-Y36   HP0-Y36 certification   HP0-Y36

ITCertKing offer the latest 650-304 exam material and high-quality MSC-321 pdf questions & answers. Our 100-101 VCE testing engine and C_TFIN52_66 study guide can help you pass the real exam. High-quality 646-365 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/HP0-Y36_exam.html