The latest Lotus certification 190-522 exam practice questions and answers

ITCertKing is a professional website. It focuses on the most advanced Lotus 190-522 for the majority of candidates. With ITCertKing, you no longer need to worry about the Lotus 190-522 exam. ITCertKing exam questions have good quality and good service. As long as you choose ITCertKing, ITCertKing will be able to help you pass the exam, and allow you to achieve a high level of efficiency in a short time.

Using ITCertKing you can pass the Lotus 190-522 exam easily. The first time you try to participate in Lotus 190-522 exam, selecting ITCertKing's Lotus 190-522 training tools and downloading Lotus 190-522 practice questions and answers will increase your confidence of passing the exam and will effectively help you pass the exam. Other online websites also provide training tools about Lotus certification 190-522 exam, but the quality of our products is very good. Our practice questions and answers have high accuracy. Our training materials have wide coverage of the content of the examination and constantly update and compile. ITCertKing can provide you with a very high accuracy of exam preparation. Selecting ITCertKing can save you a lot of time, so that you can get the Lotus 190-522 certification earlier to allow you to become a Lotus IT professionals.

We should use the most relaxed attitude to face all difficulties. Although Lotus 190-522 exam is very difficult, but we candidates should use the most relaxed state of mind to face it. Because ITCertKing's Lotus 190-522 exam training materials will help us to pass the exam successfully. With it, we would not be afraid, and will not be confused. ITCertKing's Lotus 190-522 exam training materials is the best medicine for candidates.

Choosing to participate in Lotus certification 190-522 exam is a wise choice, because if you have a Lotus 190-522 authentication certificate, your salary and job position will be improved quickly and then your living standard will provide at the same time. But passing Lotus certification 190-522 exam is not very easy, it need to spend a lot of time and energy to master relevant IT professional knowledge. ITCertKing is a professional IT training website to make the training scheme for Lotus certification 190-522 exam. At first you can free download part of exercises questions and answers about Lotus certification 190-522 exam on www.ITCertKing.com as a try, so that you can check the reliability of our product. Generally, if you have tried ITCertKing's products, you'll very confident of our products.

Exam Code: 190-522
Exam Name: Lotus (Deploying Domino R5 Applications)
One year free update, No help, Full refund!
Total Q&A: 46 Questions and Answers
Last Update: 2013-09-30

There a galaxy of talents in the 21st century, but professional IT talents not so many. Society need a large number of professional IT talents. Now IT certification exam is one of the methods to inspect the employees' ability, but it is not so easy to is one of the way to IT certification exams. Generally, people who participate in the IT certification exam should choose a specific training course, and so choosing a good training course is the guarantee of success. ITCertKing's training course has a high quality, which its practice questions have 95% similarity with real examination. If you use ITCertKing's product to do some simulation test, you can 100% pass your first time to attend IT certification exam.

190-522 Free Demo Download: http://www.itcertking.com/190-522_exam.html

NO.1 Helga created a new application. She used C code as part of the application.
Which one of the following will need to be done to the workstation in order for this
application to work on a Web client?
A. C code will NOT work.
B. The browser must support C APIs.
C. A C interpreter will need to be loaded.
D. The Notes client must be enabled to use C code.
Answer: A

Lotus   190-522 exam prep   190-522 practice test   190-522 certification   190-522 original questions

NO.2 An application was handed off to the Domino Administrator for deployment. The
hand-off sheet indicated that a form in the database needed to be placed in several
mail files.
When the owners of those mail filed tries to access documents which used that form,
the following message appeared:
"Cannot locate field definition for Field: Status"
Which one of the following could have caused that message to appear?
A. The Status field was not fully defined.
B. The Status field was defined, but not copies to the mail file.
C. The Status shared field was defined, but not copied to the mail file.
D. The Status shared field was defined, but the shared field link was not available to the
mail file.
Answer: D

Lotus   190-522 practice test   190-522 certification   190-522

NO.3 David signs a database before placing it into production.
Which one of the following would be a reason for doing this?
A. For ACL security.
B. For cross-certification.
C. For server access security.
D. For design element security.
Answer: D

Lotus   190-522   190-522 exam simulations   190-522 answers real questions   190-522 certification training

NO.4 A discussion database has been deployed on ServerA and ServerB. ServerA should
receive everything other than ACL and design changes when the server replicates
with ServerB.
Which one of the following access levels should ServerB be assigned in ServerA's copy
of the database?
A. Editor
B. Manager
C. Designer
D. Manager with the No ACL option selected.
Answer: A

Lotus   190-522 certification   190-522 answers real questions   190-522   190-522 demo

NO.5 An application has been deployed on ServerA/ Certkiller . However, Mona is denied
access to that server.
Which one of the following might cause Mona to be denied access to ServerA/ Certkiller ?
A. Mona deleted the public key from her ID file.
B. Mona's Person document has the NoAccess field selected.
C. ServerA/ Certkiller has the NOTES.INI parameter NO_DIALUP_ACCESS turned on.
D. ServerA/ Certkiller 's Server document is only allowing access to users who have
person documents in the Domino Directory.
Mona's Person document is not in the Domino Directory.
Answer: D

Lotus test answers   190-522 certification   190-522 certification

NO.6 Vera placed a Readers field in a form.
Which one of the following describes what a Readers field does?
A. It records the name of the people, groups, and/or servers who have read the document.
B. It restricts access to the document to the name of the people, groups, and/or servers
listed in it.
C. It allows a person, group, and/or server listed as having No Access in the ACL to read
individual documents.
D. It causes the document to appear with an unread marker for people in the Readers field
until they have opened the document at least once.
Answer: B

Lotus pdf   190-522   190-522

NO.7 Bert administers a Domino environment consisting of multiple domains. The
environment includes several mail-enabled applications which require addressing
information from all of the domains.
In which one of the following ways can Bert make the addressing information available
to the company's traveling Notes users?
A. Set up Cascading Addressing Books on the Domino servers.
B. Add the MOBILE_DIRECTORY=1 variable to each user's NOTES.INI file.
C. Set up Master Address Books on the Domino servers and replicate locally to the user's
laptops.
D. Create a Directory Catalog that includes each domain's user information and replicate
it to the users' laptops.
Answer: D

Lotus   190-522   190-522 certification training   190-522 certification

NO.8 Jenny created a new application. She used JavaScript as part of the application. The
application has been tested to work on a Web client.
Which one of the following will need to be done to the workstation in order for this
application to work in a Notes client?
A. The browser must support Java.
B. Nothing. JavaScript will work as is.
C. The workstation must be enabled to use JavaScript.
D. A JavaScript translator will need to be added to the workstation.
Answer: C

Lotus exam prep   190-522 questions   190-522 study guide

NO.9 A workflow application was developed which required a combination of routing and
replication for document distribution. Documents were routed to people and to a
database.
Which one of the following did the Domino administrator do to enable document routing
to work?
A. She created a mail in database document.
B. She created a workflow routing document.
C. She sent the NOTES.INI parameter WORKFLOW_ENABLED=1.
D. She added the database to the routing tab of the Server document.
Answer: A

Lotus certification training   190-522   190-522   190-522 answers real questions   190-522
Search the Domino 5 admin help with "main-in database".

NO.10 Which one of the following is NOT a Note?
A. Form
B. Hotspot
C. Document
D. Shared agent
Answer: B

Lotus exam prep   190-522 exam dumps   190-522 questions   190-522 pdf   190-522 answers real questions   190-522

ITCertKing offer the latest 000-226 exam material and high-quality 74-343 pdf questions & answers. Our 000-955 VCE testing engine and 70-486 study guide can help you pass the real exam. High-quality 70-463 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/190-522_exam.html

Latest Lotus 190-956 of exam practice questions and answers free download

If you choose the help of ITCertKing, we will spare no effort to help you pass the exam. Moreover, we also provide you with a year of free after-sales service to update the exam practice questions and answers. Do not hesitate! Please select ITCertKing, it will be the best guarantee for you to pass 190-956 certification exam. Now please add ITCertKing to your shopping cart.

In this competitive society, being good at something is able to take up a large advantage, especially in the IT industry. Gaining some IT authentication certificate is very useful. Lotus 190-956 is a certification exam to test the IT professional knowledge level and has a Pivotal position in the IT industry. While Lotus 190-956 exam is very difficult to pass, so in order to pass the Lotus certification 190-956 exam a lot of people spend a lot of time and effort to learn the related knowledge, but in the end most of them do not succeed. Therefore ITCertKing is to analyze the reasons for their failure. The conclusion is that they do not take a pertinent training course. Now ITCertKing experts have developed a pertinent training program for Lotus certification 190-956 exam, which can help you spend a small amount of time and money and 100% pass the exam at the same time.

If you're still studying hard to pass the Lotus 190-956 exam, ITCertKing help you to achieve your dream. We provide you with the best Lotus 190-956 exam materials. It passed the test of practice, and with the best quality. It is better than Lotus 190-956 tutorials and any other related materials. It can help you to pass the Lotus 190-956 exam, and help you to become a strong IT expert.

Exam Code: 190-956
Exam Name: Lotus (IBM Lotus Notes Domino 8.5 System Administration Update.)
One year free update, No help, Full refund!
Total Q&A: 80 Questions and Answers
Last Update: 2013-09-30

Passing Lotus certification 190-956 exam is not simple. Choose the right training is the first step to your success and choose a good resource of information is your guarantee of success. While the product of ITCertKing is a good guarantee of the resource of information. If you choose the ITCertKing product, it not only can 100% guarantee you to pass Lotus certification 190-956 exam but also provide you with a year-long free update.

190-956 Free Demo Download: http://www.itcertking.com/190-956_exam.html

NO.1 Which of the following causes a new server thread to be created that monitors all messages written to
the console log file and duplicates these messages into another file?
A.File log output
B.Notes text logging
C.Console log mirroring
D.Server log duplicating
Answer: C

Lotus test   190-956 study guide   190-956

NO.2 Notes shared login allows users to start Lotus Notes with their Notes IDs without having to provide
Notes passwords. Instead, which of the following do they need to provide?
A.A secret passphrase
B.A Windows password
C.Passwords from more than one person
D.An unlock code from the ID vault on their home server
Answer: B

Lotus demo   190-956   190-956   190-956 answers real questions   190-956

NO.3 Upon viewing the Administration Process activity through the statistics generated during administration
request processing, you have found a large number of Waiting statistics in one of the message queues.
Which of the following would this signify?
A.Administration Process threads are waiting for requests to process
B.The administrator has pending Administration Process requests for approval
C.The server is processing requests without utilizing all the process handlers
D.The request processing threads are busy running requests that take longer times
Answer: D

Lotus   190-956 test questions   190-956   190-956 exam simulations   190-956 original questions

NO.4 When a user removes a mail message with an attachment stored in DAOS, which of the following
occurs if the user is assigned a mail quota?
A.The total attachment size is removed against the user's quota
B.The total size of the mail message and attachment is removed against the user's quota
C.The total size of any attachment stored in DAOS does not count toward the user's quota
D.The total size of the mail message without the attachment is removed against the user's quota
Answer: A

Lotus dumps   190-956 answers real questions   190-956 demo   190-956 test questions

NO.5 In Lotus Notes 8.5, the start-up sequence has been reordered for users. Presume that the following
notes.ini entry is configured:
ENABLE_EARLY_AUTHENTICATION=0
Which of the following occurs to the user experience?
A.Users are not allowed to utilize Windows shared login
B.Users are prompted to authenticate before the Notes workbench
C.The Notes workbench appears, and users are prompted to authenticate
D.Users are forced to utilize Windows shared login instead of Notes login
Answer: C

Lotus   190-956 pdf   190-956   190-956 test answers

NO.6 The following variable was found in a user's notes.ini file:
ENABLE_EARLY_AUTHENTICATION=0
Which of the following will not function properly?
A.Roaming user
B.Authentication after the Notes workbench appears
C.The ability to log into the integrated Sametime client
D.The ability to recover user ID files from the server ID vault
Answer: A

Lotus study guide   190-956 exam prep   190-956   190-956 answers real questions

NO.7 Your development team has modified the client download site for Lotus Traveler. All of the changes,
though, are not being seen as the server is still pointing to the old directory and files. You have
successfully modified the Home URL in the Internet Site Document. Which of the following must also be
modified?
A.The servlet utilized by the Domino Web server
B.The NTS_WEBSITE_HOME parameter in the notes.ini file
C.Disable Internet Site documents in the Domino server
D.Make TCP port 8642 available to all users to see the new site documents
Answer: B

Lotus   190-956   190-956   190-956

NO.8 Terry is working on a document in a database on a server that is DAOS- enabled. While in the
document, Terry replaces the attachment with a new version. Which of the following occurs to the
attachment in the DAOS store?
A.The server adjusts references to the attachment in DAOS
B.The server removes the reference from all mail files that pointed to that original file reference
C.The server removes the previous attachment entirely from DAOS and inserts the link to the new
attachment
D.The server sends the full previous attachment to all user mail files that pointed to that original file
reference
Answer: A

Lotus exam dumps   190-956   190-956   190-956 dumps   190-956 exam prep

NO.9 Your Domino server has been configured for DAOS, and all mailfiles have also been enabled
successfully. In which of the following times will consolidation occur when a user saves an attachment that
meets the defined DAOS size settings?
A.Immediately
B.The next time the DAOS service runs
C.After the user closes the current Notes session
D.By the schedule defined in the server configuration document
Answer: A

Lotus   190-956   190-956 original questions   190-956   190-956   190-956

NO.10 To help thwart unauthorized access to ID files in the ID vault, you can choose to require which of the
following?
A.That someone with password reset authority approves all ID downloads
B.That only group names are placed in the vault security document in the Domino server
C.That the person fills out a download request in the vault to be approved by a vault manager
D.That the ID vault be encrypted with a secret encryption key shared with only the proper administrators
Answer: A

Lotus   190-956   190-956   190-956 exam dumps   190-956

ITCertKing offer the latest MB6-889 exam material and high-quality 70-480 pdf questions & answers. Our MB6-871 VCE testing engine and 70-342 study guide can help you pass the real exam. High-quality 70-465 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/190-956_exam.html

Lotus 190-803 for the latest training materials

ITCertKing senior experts have developed exercises and answers about Lotus certification 190-803 exam with their knowledge and experience, which have 95% similarity with the real exam. I believe that you will be very confident of our products. If you choose to use ITCertKing's products, ITCertKing can help you 100% pass your first time to attend Lotus certification 190-803 exam. If you fail the exam, we will give a full refund to you.

Everyone has their own dreams. What is your dream? Is it a promotion, a raise or so? My dream is to pass the Lotus 190-803 exam. I think with this certification, all the problems will not be a problem. However, to pass this certification is a bit difficult. But it does not matter, because I chose ITCertKing's Lotus 190-803 exam training materials. It can help me realize my dream. If you also have a IT dream, quickly put it into reality. Select ITCertKing's Lotus 190-803 exam training materials, and it is absolutely trustworthy.

Related study materials proved that to pass the Lotus 190-803 exam certification is very difficult. But do not be afraid, ITCertKing have many IT experts who have plentiful experience. After years of hard work they have created the most advanced Lotus 190-803 exam training materials. ITCertKing have the best resource provided for you to pass the exam. Does not require much effort, you can get a high score. Choose the ITCertKing's Lotus 190-803 exam training materials for your exam is very helpful.

ITCertKing can provide you with a reliable and comprehensive solution to pass Lotus certification 190-803 exam. Our solution can 100% guarantee you to pass the exam, and also provide you with a one-year free update service. You can also try to free download the Lotus certification 190-803 exam testing software and some practice questions and answers to on ITCertKing website.

Let me be clear here a core value problem of ITCertKing. All Lotus exams are very important. In this era of rapid development of information technology, ITCertKing just one of the questions providers. Why do most people to choose ITCertKing ? Because the ITCertKing exam information will be able to help you pass the test. It provides the information which is up to date. With ITCertKing Lotus 190-803 test questions, you will become full of confidence and not have to worry about the exam. However, it lets you get certified effortlessly.

ITCertKing IT expert team take advantage of their experience and knowledge to continue to enhance the quality of exam training materials to meet the needs of the candidates and guarantee the candidates to pass the Lotus certification 190-803 exam which is they first time to participate in. Through purchasing ITCertKing products, you can always get faster updates and more accurate information about the examination. And ITCertKing provide a wide coverage of the content of the exam and convenience for many of the candidates participating in the IT certification exams except the accuracy rate of 100%. It can give you 100% confidence and make you feel at ease to take the exam.

Each IT person is working hard for promotion and salary increases. It is also a reflection of the pressure of modern society. We should use the strength to prove ourselves. Participate in the Lotus 190-803 exam please. In fact, this examination is not so difficult as what you are thinking. You only need to select the appropriate training materials. ITCertKing's Lotus 190-803 exam training materials is the best training materials. Select the materials is to choose what you want. In order to enhance your own, do it quickly.

Exam Code: 190-803
Exam Name: Lotus (Using LotusScript in IBM Lotus Domino 8 Applications)
One year free update, No help, Full refund!
Total Q&A: 90 Questions and Answers
Last Update: 2013-09-30

190-803 Free Demo Download: http://www.itcertking.com/190-803_exam.html

NO.1 Chris has imported a number of documents into a Notes database that contain MIME data. He now
needs to write an agent that will display the type of MIME encoding for the data. What code fragment
below will get the MIME entry and display the encoding type?
A.Set mime = doc.GetAllMIMEEntries Messagebox "Encoding type: " + mime.Encoding
B.Set mime = doc.GetMIMEEntry Messagebox "Encoding type: " + Cstr(mime.Encoding)
C.Set mime = doc.GetFirstItem(mime) Messagebox "Encoding type: " + mime.Encoding
D.Set mime = doc.GetFirstMIMEEntry Messagebox "Encoding type: " + Cstr(mime.Encoding)
Answer:B

Lotus   190-803   190-803   190-803 certification

NO.2 The error message "Error loading USE or USELSX module" can be caused by which of the following?
A.An improperly defined Const value
B.An ODBC connection that cannot be made
C.An attempt to use NotesUIWorkspace in a background scheduled agent
D.A script library that can't be found or needs to be recompiled using "Recompile All LotusScript"
Answer:D

Lotus braindump   190-803   190-803 exam dumps   190-803 answers real questions   190-803 study guide   190-803

NO.3 The Salary form needs an AuditHistory field. When documents are changed, Sahir's script must record
the date/time, editor's name, and values of all changed fields before and after the change. The solution
must also be usable in other forms, and must work without modification, even if new fields are added to
the forms. How can Sahir do this?
A.Write Entering event code for each field, recording field values. Write Exiting events to update
AuditHistory if the values change.
B.Write Postopen event code to populate a list with item names and item values as the document is
opened. Write Querysave event code to examine current item values, and update AuditHistory for any
changed items.
C.Write onFocus event code to populate a hidden temporary field with the item values. Write onChange
event code to update the AuditHistory if the field is changed.
D.Write onLoad event code to populate a list with item names and item values as the document is opened.
In the form onExit event, write code to examine current item values and update AuditHistory for any items
that have changed.
Answer:B

Lotus demo   190-803   190-803 test questions   190-803 exam prep

NO.4 Which of the following methods will always return a collection of documents that are in the SAME order
that they appear in the view.
A.NotesView.Search
B.NotesView.GetCategory
C.NotesView.GetAllEntriesByKey
D.NotesView.GetAllDocumentsByKey
Answer:C

Lotus   190-803   190-803

NO.5 Suzanne has built a view of all movie rentals sorted by Checkout Status. The possible values for
CheckoutStatus are "Available", "Checked Out", "Overdue", and "Overdue With Exceptions". None of
these categories is empty. Suzanne is writing an agent to retrieve all of the rental documents that have a
CheckoutStatus of "Overdue", and send out emails informing the renters of this status. What NotesView
method will build a collection of only the documents with a status of "Overdue"?
A.GetAllDocumentsByKey("Overdue")
B.GetDocumentsByKey("Overdue", True)
C.GetAllDocumentsByKey("Overdue", True)
D.GetAllDocumentsByKey("Overdue", False)
Answer:C

Lotus braindump   190-803   190-803

NO.6 Given the following piece of code, where "doc" is a NotesDocument: fieldValue =
doc.GetItemValue("Title") Print "This document's title is " & fieldValue(0) Which of the following is a correct
example of using the "Extended class" syntax to replace the example code above?
A.Print "This document's title is " & doc.Title
B.Print "This document's title is " & doc.Title(0)
C.Print "This document's title is " & doc.GetField.Title
D.Print "This document's title is " & doc.GetField.Title(0)
Answer:B

Lotus   190-803 exam simulations   190-803   190-803 exam simulations   190-803

NO.7 Devin's canonical Notes name is CN=Devin Smith/OU=Accounting/O=ACME. When he clicks an
action button in an email he received, a messagebox appears which includes this text: Devin Smith is
running Notes 7.0 What is the underlying code that produces this message?
A.Dim session As New NotesSession Messagebox session.UserName + " is running " +
session.NotesVersion
B.Dim session As New NotesSession Messagebox session.CommonUserName + " is running " +
session.NotesVersion
C.Dim session As New NotesSession Messagebox session.CommonUserName + " is running " +
session.NotesBuildVersion
D.Dim session As New NotesSession Dim db As NotesDatabase Set db = session.CurrentDatabase
Messagebox db.CommonUserName + " is running " + db.NotesVersion
Answer:B

Lotus   190-803 test   190-803 pdf   190-803

NO.8 Aitana is working in the company's Inventory database. She wants to create an array called 'Assembly'
that will be used to reference 10 instances of the Part class. Aitana can create a single instance of the
Part class using code like this: Dim myPart As New Part But she is having a problem creating the
'Assembly' array. What is wrong with the following line of code: Dim Assembly(9) As New Part
A.The New keyword cannot be used to declare an array of object reference variables.
B.'Assembly' is a reserved word in LotusScript, and cannot be used as a variable name.
C.If an array declared as Assembly(9) is to hold 10 elements, Option Base 0 must be used.
D.An array cannot be used to hold multiple Class instances.
Answer:A

Lotus exam   190-803   190-803   190-803 exam simulations   190-803   190-803

NO.9 The NotesStream class is used to read and write which of the following?
A.Files
B.Network sockets
C.Domino server console commands
D.Binary data in NotesRichText fields (like attachments and inline images)
Answer:A

Lotus   190-803   190-803   190-803 test answers   190-803 braindump   190-803 practice test

NO.10 Neala is using a hidden field on the Request form to store a temporary value for the request status.
Since this field will not be stored, Neala has created it as a Computed for display field. Neala is trying to
use the code below to set the tempStatus field to "Draft" when a new document is created with the
Request form. An error message displays whever a new Request is created. What could be the problem?
Sub Postopen(Source As Notesuidocument) If Source.IsNewDoc Then Call
Source.FieldSetText( "tempStatus", "Draft" ) End If End Sub
A.In order for the FieldSetText method to be used, a field must be editable. Hidden fields are not editable.
B.The Postopen event occurs before the user has input focus, so only back-end methods will work from
this event.
C.In order for the FieldSetText method to be used, a field must be editable. Computed for display fields
are not editable.
D.The Postopen event occurs after the document has opened, but Computed for display fields are not
available for manipulation until after the user has input focus.
Answer:C

Lotus original questions   190-803 demo   190-803 test   190-803

NO.11 Ichiro needs to write an agent to read a comma-delimited ASCII file of data about parts that his
company uses when building computers. The data is from one of the parts suppliers, and includes 10
fields in each record. Ichiro needs to extract the Part Number, Part Description, and Price from each input
record and update his company's Inventory database with the current data. How should Ichiro proceed?
A.Create a user-defined data Type to represent a Part. Write a 'getter' method for each of the 3 fields that
need to be accessed from the data Type.
B.Create a user-defined class to represent the ASCII file. Write a 'getter' method to retrieve each record,
and use the NotesStream.SplitText method to extract the fields.
C.Create a user-defined class to represent the Parts data. Use notesDOMTextNode.SplitText( "," ) to
parse each field into the appropriate member variable.
D.Create a user-defined data Type to represent the structure of the Parts data. Each field of a given input
record can be referenced using the appropriate member variable.
Answer:D

Lotus   190-803   190-803

NO.12 For agents that run on new and modified documents, newly received mail documents, pasted
documents, or newly modified documents, what method can you use to mark each document as
"processed" to ensure that a document gets processed by the agent only once (unless it's modified,
mailed, or pasted again)?
A.NotesView.UpdateAll
B.NotesDocument.SetProcessed
C.NotesDocumentCollection.Stamp
D.NotesSession.UpdateProcessedDoc
Answer:D

Lotus practice test   190-803   190-803

NO.13 Marvin wants to export a given Notes document to a DXL text file. How would he accomplish this task?
A.He would use the NotesXMLTransformer class to copy the document directly to a text file
B.He would use the ExportDXL method of the NotesDocument class to send the document to a
NotesStream that writes to a text file
C.He would create a NotesDXLExporter object, set the input to the Notes document in question, and set
the output to a NotesDXLOutput object that writes to a text file
D.He would create a NotesDXLExporter object, set the input to the Notes document in question, and set
the output to a string that indicates the path of the text file he wants to create.
Answer:D

Lotus   190-803 practice test   190-803 test   190-803   190-803 dumps   190-803 exam

NO.14 What does the following code do? Dim session As New NotesSession Dim location As String location
= session.GetEnvironmentString("ENVLoc")
A.Gets the value of the Notes.ini variable called "ENVLoc"
B.Gets the value of the Notes registry entry called "ENVLoc"
C.Gets the value of the Notes.ini variable called "$ENVLoc"
D.Gets the value of the DOS environment variable called "ENVLoc"
Answer:C

Lotus   190-803 study guide   190-803   190-803   190-803 pdf

NO.15 Avery has been asked to write a web service in his Domino application. The web service will allow an
Oracle application to query the Movie Rental database with a member identification number and receive a
list of all movies the member has rented in the last 30 days. What are the language options available to
Avery for writing this web service?
A.LotusScript and Java
B.LotusScript, but not Java
C.Java, but not LotusScript
D.LotusScript, Java, and @Formula
Answer:A

Lotus exam dumps   190-803   190-803

NO.16 Victor is creating a script that will generate multiple values to be put into a single field. Which one of the
following strategies should he follow?
A.Define the field on the form to be multivalue.
B.Create a scalar identifier, and use a loop which writes the identifier's value to the field.
C.Create a string identifier which separates values with a carriage return, and write the identifier to the
field.
D.Create an array to contain the values, and assign the array to the item in the document using the
extended class syntax
Answer:D

Lotus test   190-803 braindump   190-803 braindump   190-803 test questions

NO.17 Pitr has a Notes Rich Text field on his Account Overview document that contains formatted text,
attachments, and images. He would like to use the textual information in that field in a view. What
NotesRichTextItem method could Pitr use to create a new field containing only the text information of the
original field?
A.TextOnly
B.ConvertToText
C.GetUnformattedText
D.RemoveEmbeddedObjects
Answer:C

Lotus certification training   190-803   190-803 exam dumps   190-803 demo   190-803 pdf

NO.18 Will is creating an archive script which will copy the document object (doc) from the current database
to an Archive database. The name of the archive database is ARCHIVE.NSF and it resides on the
Dunn_Hub/Dunn server. So far, the code he has written is: Dim s As New NotesSession Dim db As
NotesDatabase Set db=s.CurrentDatabase Dim adb As New
NotesDatabase("Dunn_Hub/Dunn","ARCHIVE.NSF") Dim doc As NotesDocument Dim col As
NotesDocumentCollection Set col=db.UnprocessedDocuments Set doc=col.GetFirstDocument do until
doc is nothing ======>MISSING LINE Set doc=col.GetNextDocument(doc) loop Which one of the
following lines of code should be placed on the MISSING LINE to copy the document to the Archive
database?
A.doc.CopyAllItems(doc)
B.doc.CopyToDatabase db
C.doc.CopyToDatabase col
D.doc.CopyToDatabase adb
Answer:D

Lotus questions   190-803   190-803   190-803   190-803 practice test

NO.19 LS2J is a technology that allows you to access Java classes and libraries directly from LotusScript.
Part of this technology is that certain Java data types are mapped directly to LotusScript data types. What
does a Java String map to in LotusScript?
A.String
B.JavaString
C.Array of Bytes
D.Array of Strings
Answer:A

Lotus   190-803 questions   190-803   190-803   190-803 test questions

NO.20 Vicki has been asked to integrate device data from her company's network monitoring utilities into
Notes documents. The utilities produce data in an XML format. What strategy can Vicki use in her
LotusScript agent to parse the data for import into Notes?
A.Read the data using a NotesStream object,. Parse the XML data using classes derived from the
NotesXMLProcessor class.
B.Rename the XML file using an extension of ".dxl". Read and parse the data using methods of the
NotesDXLImporter class.
C.Rename the XML file using an extension of ".dxl". Insert a DOCTYPE definition pointing to:
'c:\notes\data\xmlschemas/domino_8_0.dtd' Read and parse the data using methods of the
NotesDXLImporter class.
D.LotusScript includes methods to parse the specific DXL format. Since this file is a more generic XML
format, Vicki will need to use a tool such as Excel to convert the XML to a format that can be processed
with COM classes.
Answer:A

Lotus   190-803 certification training   190-803 test questions

ITCertKing offer the latest 70-463 exam material and high-quality 700-101 pdf questions & answers. Our NS0-155 VCE testing engine and JN0-730 study guide can help you pass the real exam. High-quality 3103 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/190-803_exam.html

ITCertKing Juniper JN0-311 exam practice questions and answers

ITCertKing is a website that specializes in providing IT exam information. The pass rate can achieve 100%. Which is one of the reasons that most candidates willing to believe the ITCertKing. ITCertKing have been always concerned about the needs of the majority of candidates. We always with the greatest ability to meet the needs of the candidates . ITCertKing's Juniper JN0-311 exam training materials is an unprecedented IT certification training materials. With it, your future career will be rain or shine.

Choosing to participate in Juniper certification JN0-311 exam is a wise choice, because if you have a Juniper JN0-311 authentication certificate, your salary and job position will be improved quickly and then your living standard will provide at the same time. But passing Juniper certification JN0-311 exam is not very easy, it need to spend a lot of time and energy to master relevant IT professional knowledge. ITCertKing is a professional IT training website to make the training scheme for Juniper certification JN0-311 exam. At first you can free download part of exercises questions and answers about Juniper certification JN0-311 exam on www.ITCertKing.com as a try, so that you can check the reliability of our product. Generally, if you have tried ITCertKing's products, you'll very confident of our products.

You can first download ITCertKing's free exercises and answers about Juniper certification JN0-311 exam as a try, then you will feel that ITCertKing give you a reassurance for passing the exam. If you choose ITCertKing to provide you with the pertinence training, you can easily pass the Juniper certification JN0-311 exam.

The appropriate selection of training is a guarantee of success. However, the choice is very important, ITCertKing popularity is well known, there is no reason not to choose it. Of course, Give you the the perfect training materials, if you do not fit this information that is still not effective. So before using ITCertKing training materials, you can download some free questions and answers as a trial, so that you can do the most authentic exam preparation. This is why thousands of candidates depends ITCertKing one of the important reason. We provide the best and most affordable, most complete exam training materials to help them pass the exam.

ITCertKing's products can not only help customers 100% pass their first time to attend Juniper certification JN0-311 exam, but also provide a one-year of free online update service for them, which will delivery the latest exam materials to customers at the first time to let them know the latest certification exam information. So ITCertKing is a very good website which not only provide good quality products, but also a good after-sales service.

Only to find ways to success, do not make excuses for failure. To pass the Juniper JN0-311 exam, in fact, is not so difficult, the key is what method you use. ITCertKing's Juniper JN0-311 exam training materials is a good choice. It will help us to pass the exam successfully. This is the best shortcut to success. Everyone has the potential to succeed, the key is what kind of choice you have.

Exam Code: JN0-311
Exam Name: Juniper (WX, Associate(JNCIA-WX))
One year free update, No help, Full refund!
Total Q&A: 123 Questions and Answers
Last Update: 2013-09-30

JN0-311 Free Demo Download: http://www.itcertking.com/JN0-311_exam.html

NO.1 What is NSC's functionality?
A. Web caching
B. sequence caching
C. memory-based compression
D. next-generation compression
Answer: B

Juniper questions   JN0-311   JN0-311

NO.2 Which two environments would take advantage of TCP Acceleration (AFP)? (Choose two.)
A. satellite networks
B. low-latency networks
C. long-haul link with 95% compressibility.
D. long-haul link with 10% compressibility.
Answer:AC

Juniper dumps   JN0-311 study guide   JN0-311 certification   JN0-311 demo

NO.3 Which two patented or patent-pending compression and caching technologies are used for WX/WXC
devices? (Choose two.)
A. Network Sequence Caching (NSC)
B. Molecular Sequence Caching (MSC)
C. Network Sequence Reduction (NSR)
D. Molecular Sequence Reduction (MSR)
Answer:AD

Juniper exam simulations   JN0-311 dumps   JN0-311 answers real questions

NO.4 Which three statistics does the Executive report summarize? (Choose three.)
A. latency and loss
B. compression results
C. traffic (by application)
D. CRC and alignment errors
E. user access (by username)
Answer: ABC

Juniper   JN0-311 exam dumps   JN0-311 practice test   JN0-311

NO.5 Which two secure remote access methods are available on the WX platforms? (Choose two.)
A. SSL
B. SSH
C. Telnet
D. HTTP
Answer:AB

Juniper exam prep   JN0-311 demo   JN0-311 answers real questions   JN0-311   JN0-311 questions

NO.6 Which two statements describe the criteria bandwidth detection uses to dynamically alter bandwidth
allocation? (Choose two.)
A. Throughput is raised as latency decreases.
B. Throughput is based on available bandwidth.
C. Throughput is lowered as latency decreases.
D. Latency is measured by SYNs returned for each metapacket.
Answer:AB

Juniper test questions   JN0-311 answers real questions   JN0-311 test questions   JN0-311

NO.7 Which three locations in WebView allow you to confirm that the endpoints are configured properly?
(Choose three.)
A. Monitor > Endpoints
B. Acceleration > Endpoints
C. Device Setup > Endpoints
D. Compression > Endpoints
E. Admin > Maintenance > Display Configuration
Answer:ADE

Juniper certification   JN0-311   JN0-311   JN0-311 test answers   JN0-311

NO.8 What are two ways to view the system log files on a WX device? (Choose two.)
A. Use the CLI and enter show log.
B. Use the CLI and enter show all.
C. Use the CLI and enter show logging.
D. In WebView, choose Admin > Tools > Display System Log.
Answer:AD

Juniper test answers   JN0-311   JN0-311 original questions   JN0-311

NO.9 Which two configurations are made using the QoS Setup Wizard? (Choose two.)
A. Assign applications to traffic classes.
B. Use ToS/DSCP values for traffic classes.
C. Exclude subnets from QoS management.
D. Select dedicated vs. over-subscribed circuits.
Answer:AD

Juniper test answers   JN0-311 test questions   JN0-311   JN0-311

NO.10 Which statement is true about compression subnets?
A. Compression subnets are turned on by default.
B. Compression subnets advertise remote routes.
C. Compression subnets are usually LAN-side subnets.
D. Compression subnets are usually WAN-side subnets.
Answer: C

Juniper   JN0-311 test   JN0-311 study guide   JN0-311 demo

ITCertKing offer the latest 74-343 exam material and high-quality 1Z0-597 pdf questions & answers. Our C-TSCM62-64 VCE testing engine and 1Z0-466 study guide can help you pass the real exam. High-quality 100-101 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-311_exam.html

Juniper JN0-532 study guide

After the advent of the ITCertKing's latest Juniper certification JN0-532 exam practice questions and answers, passing Juniper certification JN0-532 exam is no longer a dream of the IT staff. All of ITCertKing's practice questions and answers about Juniper certification JN0-532 exam have high quality and 95% similarity with the real exam questions. ITCertKing is worthful to choose. If you choose ITCertKing's products, you will be well prepared for Juniper certification JN0-532 exam and then successfully pass the exam.

ITCertKing is a website to achieve dreams of many IT people. ITCertKing provide candidates participating in the IT certification exams the information they want to help them pass the exam. Do you still worry about passing Juniper certification JN0-532 exam? Have you thought about purchasing an Juniper certification JN0-532 exam counseling sessions to assist you? ITCertKing can provide you with this convenience. ITCertKing's training materials can help you pass the certification exam. ITCertKing's exercises are almost similar to real exams. With ITCertKing's accurate Juniper certification JN0-532 exam practice questions and answers, you can pass Juniper certification JN0-532 exam with a high score.

ITCertKing's Juniper JN0-532 exam training materials are the necessities of each of candidates who participating in the IT certification. With this training material, you can do a full exam preparation. So that you will have the confidence to win the exam. ITCertKing's Juniper JN0-532 exam training materials are highly targeted. Not every training materials on the Internet have such high quality. Only ITCertKing could be so perfect.

Exam Code: JN0-532
Exam Name: Juniper (FWV,Specialist (JNCIS -FWV))
One year free update, No help, Full refund!
Total Q&A: 146 Questions and Answers
Last Update: 2013-09-30

If you find any quality problems of our JN0-532 or you do not pass the exam, we will unconditionally full refund. ITCertKing is professional site that providing Juniper JN0-532 questions and answers , it covers almost the JN0-532 full knowledge points.

JN0-532 Free Demo Download: http://www.itcertking.com/JN0-532_exam.html

NO.1 Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A.234.9.8.42
B.192.168.10.2
C.192.168.20.10
D.192.168.20.200
Answer: D

Juniper exam simulations   JN0-532   JN0-532

NO.2 What must be enabled to protect Phase 2 key exchanges?
A.Phase 1 PFS
B.Phase 2 SHA
C.Phase 2 3-DES
D.Phase 2 DH key exchange tiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: D

Juniper   JN0-532   JN0-532 study guide   JN0-532   JN0-532 certification

NO.3 Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A.NAT-traversal is enabled.
B.The rekey interval is 8 hours.
C.This device initiated the Phase 1 negotiations.
D.The certificate used in this exchange is set to never expire.
Answer: BC

Juniper   JN0-532 exam dumps   JN0-532   JN0-532   JN0-532 practice test

NO.4 Which three statements are true regarding IKE Phase 1? (Choose three.)
A.Placing the SA proposal list in message 1 is an option.
B.The digital certificate is used to decrypt the session key.
C.The DH key exchange is used to validate the session key.
D.The DH key exchange and digital certificates are both optional.
E.The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper pdf   JN0-532 practice test   JN0-532   JN0-532 pdf

NO.5 You have entered the command set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be
captured
B.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be
captured
C.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will
be captured
D.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will
be captured
Answer: C

Juniper exam   JN0-532 answers real questions   JN0-532 test   JN0-532   JN0-532   JN0-532

NO.6 Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling
from spoke to spoke. Which two of the following configuration options will meet this requirement?
(Choose two.)
A.Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B.Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C.Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D.Create separate tunnel interfaces at the hub and place them in different zones, then create policies at
the hub.
Answer: BD

Juniper   JN0-532   JN0-532   JN0-532   JN0-532 exam   JN0-532

NO.7 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: AD

Juniper   JN0-532   JN0-532

NO.8 Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to
the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched
to DataCenter2.
Which statement explains this behavior?
A.SYN checking is enabled in the tunnel.
B.The weight value for the DataCenter2 is too high.
C.VPN monitor is misconfigured in the DataCenter2.
D.Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A

Juniper   JN0-532   JN0-532 exam

NO.9 Which three OSPF parameters are interface parameters? (Choose three.)
A.cost
B.priority
C.neighbor list
D.summarization
E.advertise default route
Answer: ABC

Juniper   JN0-532 braindump   JN0-532

NO.10 You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS
using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A.The router will be the default router but will no longer be shared.
B.The router will be the default router and will still have a shareable status.
C.The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual
router must be private.
D.The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router.
The shared Virtual router will not be the default router.
Answer: B

Juniper exam dumps   JN0-532 practice test   JN0-532   JN0-532   JN0-532   JN0-532 certification training

NO.11 You have configured the following on your device.
set address trust MyPC 10.1.1.5/32
set address untrust CorpNet 10.10.0.0/16
set policy from trust to untrust MyPC CorpNet any permit
set int tunnel.1 zone untrust
set int tunnel.1 ip unnumbered int bgroup1
set ike gateway GW address 1.1.1.1 outgoing-interface e0/1 preshare Secret sec-level standard
set vpn VPN gateway GW sec-level standard
The tunnel interface is down, so the VPN cannot function properly. What is the problem?
A.The policy needs to have the action tunnel.
B.The VPN needs to be bound to the tunnel interface.
C.The tunnel interface needs to be placed in the trust zone.
D.The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper   JN0-532   JN0-532

NO.12 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A.set igmp interface ethernet0/1
B.set multicast interface ethernet0/1
C.set interface ethernet0/1 igmp router
D.set igmp interface ethernet0/1 enable
Answer: C

Juniper answers real questions   JN0-532 exam dumps   JN0-532 questions

NO.13 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A.zone
B.policy
C.interface
D.virtual router
E.virtual system
Answer: ACD

Juniper   JN0-532   JN0-532   JN0-532 practice test

NO.14 Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in
the cluster:
Why has failover not occurred?
A.The physical interfaces have not failed.
B.The track-ip interval is not sufficient to cause failover.
C.The track-ip address weight is not sufficient to cause failover.
D.The track-ip address threshold is not sufficient to cause failover.
Answer: C

Juniper   JN0-532   JN0-532 questions   JN0-532

NO.15 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A.messages 1 & 2
B.messages 2 & 3
C.messages 3 & 4
D.messages 5 & 6
Answer: D

Juniper dumps   JN0-532   JN0-532 test questions   JN0-532 practice test

NO.16 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A.236.1.1.1
B.10.10.10.1
C.20.20.20.10
D.20.20.20.200
Answer: B

Juniper original questions   JN0-532 study guide   JN0-532   JN0-532 test questions

NO.17 Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support
PIM-SM? (Choose two)
A.A multicast control policy
B.A bootstrap router process
C.A unicast routing protocol
D.A static RP
Answer: AC

Juniper exam   JN0-532   JN0-532   JN0-532

NO.18 What must be configured differently for a route-based VPN and a policy-based VPN?
A.proxy-id
B.proposals
C.remote gateway type
D.binding the tunnel interface
Answer: D

Juniper braindump   JN0-532   JN0-532 pdf   JN0-532   JN0-532 study guide

NO.19 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A.get route pim
B.get igmp source all
C.exec pim interface all query
D.get vrouter trust-vr protocol pim
Answer: D

Juniper study guide   JN0-532 test   JN0-532 certification

NO.20 Which command is used to verify that IGMP is running correctly?
A.get route igmp
B.get igmp query
C.set igmp query interface e0/1
D.exec igmp interface e0/1 query
Answer: D

Juniper test questions   JN0-532   JN0-532 test questions   JN0-532 exam simulations   JN0-532 certification training   JN0-532 braindump

ITCertKing offer the latest 000-955 exam material and high-quality 642-980 pdf questions & answers. Our C_TFIN52_64 VCE testing engine and LOT-442 study guide can help you pass the real exam. High-quality 646-048 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-532_exam.html

Juniper JN0-660 exam study materials

Juniper certification JN0-660 exam is very popular among the IT people to enroll in the exam. Passing Juniper certification JN0-660 exam can not only chang your work and life can bring, but also consolidate your position in the IT field. But the fact is that the passing rate is very low.

We are all ordinary human beings. Something what have learned not completely absorbed, so that wo often forget. When we need to use the knowledge we must learn again. When you see ITCertKing's Juniper JN0-660 exam training materials, you understand that this is you have to be purchased. It allows you to pass the exam effortlessly. You should believe ITCertKing will let you see your better future. Bright hard the hard as long as ITCertKing still, always find hope. No matter how bitter and more difficult, with ITCertKing you will still find the hope of light.

Exam Code: JN0-660
Exam Name: Juniper (Service Provider Routing and Switching, Professional)
One year free update, No help, Full refund!
Total Q&A: 171 Questions and Answers
Last Update: 2013-09-30

If you attend Juniper certification JN0-660 exams, your choosing ITCertKing is to choose success! I wish you good luck.

As a main supplier for IT certification exam training. ITCertKing's IT experts continually provide you the high quality product and a free online customer service, but also update the exam outline with the fastest speed.

JN0-660 Free Demo Download: http://www.itcertking.com/JN0-660_exam.html

NO.1 Which operational mode command displays the number of configured forwarding classes?
A. show interfaces queue ge-1/0/0
B. show interfaces terse
C. show class-of-service interface
D. show forwarding classes
Answer: A

Juniper braindump   JN0-660 demo   JN0-660 braindump   JN0-660 original questions   JN0-660 test answers

NO.2 You are the administrator for a network that uses IBGP. As the network grows, you must examine
options to support increased scale.
Which two scaling options should you consider? (Choose two.)
A. route reflection
B. areas
C. zones
D. confederations
Answer: B, C

Juniper exam dumps   JN0-660   JN0-660   JN0-660 questions

NO.3 Click the Exhibit button.
All networks shown in the exhibit contain more than one BGP speaking router. You operate ISP A.
You must ensure that customer Y sends their traffic to you over the directly connected link but customer Y
is not used for transit into your network. What do you do to accomplish this? A. Advertise routes to
customer Y with the well-known no-transit community.
B. Advertise routes to customer X with the well-known no-advertise community.
C. Advertise routes to customer Y with the well-known no-export community.
D. Advertise routes to customer X with the well-known as-transit community.
Answer: C

Juniper certification training   JN0-660 braindump   JN0-660   JN0-660 answers real questions   JN0-660 exam   JN0-660 test

NO.4 You are provisioning a new customer for access to your Layer 3 VPN. The customer is using
172.16.35.0/24 as their internal IP address space, which is also being used by an existing Layer 3 VPN
customer. The two customers share many PE routers in common across your network. Which mechanism
allows these duplicate addresses to exist in your network?
A. route origin
B. route target
C. route refresh
D. route distinguisher
Answer: D

Juniper   JN0-660 exam dumps   JN0-660

NO.5 Click the Exhibit button.
Given the drop profile in the exhibit, what is the drop probability when the buffer reaches 90% full?
A. 60%
B. 70%
C. 85%
D. 90%
Answer: B

Juniper dumps   JN0-660   JN0-660   JN0-660 demo   JN0-660 certification training

NO.6 Your multicast receivers are indirectly connected to an MX Series router. The receivers need to join
multicast group 224.2.2.2. What must be configured in IGMP to receive report messages from receivers
that are multiple hops away?
A. By default, IGMP accepts report messages from indirectly connected receivers.
B. Promiscuous mode must be enabled in IGMP.
C. Promiscuous mode must be disabled in IGMP.
D. DVMRP protocol must be configured.
Answer: B

Juniper   JN0-660 certification   JN0-660   JN0-660 certification   JN0-660 practice test

NO.7 Which CoS feature supports per-VLAN queuing and scheduling?
A. multilevel scheduling
B. hierarchical scheduling
C. tagged queuing
D. per-instance queuing
Answer: C

Juniper demo   JN0-660 pdf   JN0-660 questions

NO.8 You manage an MPLS network where the PE devices consist of multiple vendors.
You are asked to conceal the MPLS topology for all LSPs.
Which global configuration parameter will accomplish this?
A. Configure no-decrement-ttl on the ingress router only.
B. Configure no-propagate-ttl on the ingress router only.
C. Configure no-decrement-ttl on all routers within the MPLS network.
D. Configure no-propagate-ttl on all routers within the MPLS network.
Answer: D

Juniper questions   JN0-660 exam   JN0-660 test answers

NO.9 Click the Exhibit button.
All routers in the exhibit are running IS-IS level 2 routing. The wide-metrics-only parameter is configured
on all routers. Which metric does R1 see for the path to R4?
A. 136
B. 138
C. 310
D. 320
Answer: D

Juniper practice test   JN0-660   JN0-660   JN0-660 certification   JN0-660 exam   JN0-660

NO.10 Click the Exhibit button.
You are asked to configure an OSPF network based on the topology shown in the exhibit. You must keep
the link-state database in Area 1 as small as possible. What will accomplish this?
A. Area 0 should be configured as a stub area so that it will not announce routes into Area 1.
B. Area 1 should be configured as an NSSA to limit the size of the link-state database.
C. Area 1 should be configured as a stub area with no-summaries to limit the size of the link-state
database.
D. Area 0 should be configured with a virtual link to R4 to limit the size of the Area 1 link-state database.
Answer: C

Juniper   JN0-660 practice test   JN0-660   JN0-660 braindump   JN0-660 test answers

NO.11 Your are the administrator for a network that uses IS-IS as its IGP. As the network grows, you find that
the protocol's default capabilities for setting metrics is limiting your options. Which feature can you
implement to provide a larger range of metric configuration capabilities?
A. extended metrics
B. wide metrics
C. expanded metrics
D. full metrics
Answer: D

Juniper   JN0-660 braindump   JN0-660   JN0-660 exam prep

NO.12 Click the Exhibit button.
In the exhibit, Area 1 is a not-so-stubby area.
Three networks are redistributed into Area 1 on R2.
You must summarize the redistributed network addresses in Area 1 so that only one network prefix is
re-advertised into Area 0. You must also summarize the loopback addresses of R1 and R2 into a single
address in Area 0.Which configuration sample on R3 and R5 will complete this task?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

Juniper test   JN0-660 test   JN0-660   JN0-660 exam dumps   JN0-660 pdf

NO.13 Click the Exhibit button.
Based on the configuration in the exhibit, which statement is correct?
A. The 172.20.20.0/24 route is installed in the inet.0 table with the next hop of the LSP.
B. The 172.20.20.0/24 route is installed in the mpls.0 table with the next hop of the LSP.
C. The 172.20.20.0/24 route is installed in the inet.3 table with the next hop of the LSP.
D. The 172.20.20.0/24 route is installed in the inet6.3 table with the next hop of the LSP.
Answer: C

Juniper   JN0-660 demo   JN0-660

NO.14 In which two ways does VPLS populate the MAC table? (Choose two.)
A. dynamically using BGP
B. dynamically using the source MAC address on received frames
C. dynamically using LDP
D. statically using CLI
Answer: B, D

Juniper   JN0-660 demo   JN0-660 exam dumps   JN0-660   JN0-660

NO.15 Click the Exhibit button.
Referring to the exhibit, which MPLS feature was used to make the LSP the preferred path for internal
routes.?
A. traffic engineering bgp-igp
B. traffic engineering shortcuts
C. traffic engineering mpls-forwarding
D. install active
Answer: C

Juniper   JN0-660   JN0-660 answers real questions

NO.16 Click the Exhibit button.
Referring to the exhibit, which type of traffic protection mechanism is used for the LSP?
A. fast-reroute
B. link-protection
C. node-link-protection
D. secondary
Answer: B

Juniper certification   JN0-660   JN0-660   JN0-660   JN0-660 certification

NO.17 Which two statements are true about OSPFv3? (Choose two.)
A. OSPFv3 uses a 32-bit router ID to uniquely identify a node in the network.
B. OSPFv3 uses a 128-bit router ID to uniquely identify a node in the network.
C. OSPFv3 routes are always preferred over OSPFv2 routes for all traffic.
D. OSPFv3 and OSPFv2 can be configured at the same time.
Answer: A, D

Juniper   JN0-660   JN0-660   JN0-660 study guide

NO.18 Click the Exhibit button.
In the exhibit, ISP A is charged a higher rate for traffic sent to R2. You are asked to lower costs for ISP A
by configuring R1 to send traffic to R3 whenever possible.
What are two ways to do this? (Choose two.)
A. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 120
B. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 80
C. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 120
D. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 80
Answer: B, C

Juniper   JN0-660   JN0-660   JN0-660 exam   JN0-660

NO.19 Click the Exhibit button.
On your MX Series router, traffic using the critical scheduler is out of profile. All other data is currently in
profile. Referring to the exhibit, which statement is correct?
A. The critical queue is serviced before the less-critical queue.
B. The critical queue is serviced after the left-over queue.
C. The critical queue is serviced before the data queue.
D. The critical queue is serviced before the voice queue.
Answer: B

Juniper certification training   JN0-660 exam dumps   JN0-660 study guide

NO.20 Click the Exhibit button.
As shown in the exhibit, you have an adaptive LSP that requires 85 Mbps. The LSP is configured with a
primary path and a secondary path in standby mode. All connections in the MPLS network are Fast
Ethernet. Which statement is correct?
A. The primary and secondary paths are in an up state and operational.
B. The primary and secondary paths are in a down state and not operational.
C. The secondary path is in a down state and not operational.
D. The primary path is in a down state and not operational.
Answer: A

Juniper   JN0-660 pdf   JN0-660   JN0-660 dumps

ITCertKing offer the latest 000-783 exam material and high-quality 850-001 pdf questions & answers. Our JN0-533 VCE testing engine and HH0-240 study guide can help you pass the real exam. High-quality 70-465 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-660_exam.html

JN0-730 questions and answers

In order to prevent your life from regret and remorse, you should seize every opportunity which can change lives passibly. Did you do it? ITCertKing's Juniper JN0-730 exam training materials can help you to achieve your success. We can help you pass the Juniper JN0-730 exam smoothly. In order not to let success pass you by, do it quickly.

Through continuous development and growth of the IT industry in the past few years, JN0-730 exam has become a milestone in the Juniper exam, it can help you to become a IT professional. There are hundreds of online resources to provide the Juniper JN0-730 questions. Why do most people to choose ITCertKing? Because ITCertKing has a huge IT elite team, In order to ensure you accessibility through the Juniper JN0-730 certification exam， they focus on the study of Juniper JN0-730 exam. ITCertKing ensure that the first time you try to obtain certification of Juniper JN0-730 exam. ITCertKing will stand with you, with you through thick and thin.

ITCertKing help you to find real Juniper JN0-730 exam preparation process in a real environment. If you are a beginner, and if you want to improve your professional skills, ITCertKing Juniper JN0-730 exam braindumps will help you to achieve your desire step by step. If you have any questions about the exam, ITCertKing the Juniper JN0-730 will help you to solve them. Within a year, we provide free updates. Please pay more attention to our website.

If you have ITCertKing's Juniper JN0-730 exam training materials, we will provide you with one-year free update. This means that you can always get the latest exam information. As long as the Exam Objectives have changed, or our learning material changes, we will update for you in the first time. We know your needs, and we will help you gain confidence to pass the Juniper JN0-730 exam. You can be confident to take the exam and pass the exam.

Exam Code: JN0-730
Exam Name: Juniper (DX, Specialist (JNCIS-DX))
One year free update, No help, Full refund!
Total Q&A: 270 Questions and Answers
Last Update: 2013-09-30

JN0-730 Free Demo Download: http://www.itcertking.com/JN0-730_exam.html

NO.1 Which operating system is used on a NetScreen device?
A. IOS
B. Junos
C. FreeBSD
D. ScreenOS
Answer: A

Juniper   JN0-730   JN0-730   JN0-730 test

NO.2 When a firewall receives the first packet in a series, what will it immediately do?
A. Check its route table.
B. Check its session table.
C. Determine if traffic is crossing zones.
D. Verify that it is not malformed or a fragment.
Answer: D

Juniper answers real questions   JN0-730   JN0-730   JN0-730

NO.3 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A. NVRAM
B. TFTP server
C. internal flash
D. PCMCIA card
Answer: C

Juniper exam   JN0-730   JN0-730 certification   JN0-730 pdf

NO.4 In the flow decision process, the system has found a route entry matching the packet
destination IP .
Which pair will identify the policy that is applied to this packet?
A. source and destination MAC
B. source and destination interface
C. source and destination TCP port
D. source and destination IP address
Answer: B

Juniper demo   JN0-730 certification training   JN0-730   JN0-730 exam

NO.5 In the packet flow decision process, which pair identifies interzone traffic?
A. source and destination MAC
B. source and destination interface
C. source and destination TCP port
D. source and destination IP address
Answer: B

Juniper   JN0-730   JN0-730   JN0-730   JN0-730

NO.6 In the packet forwarding decision process, how is the second packet handled differently than
the first in a series of allowed interzone packets?
A. The second packet causes an ARP query.
B. The second packet is checked against the policy table.
C. The second packet is forwarded without a sanity check.
D. The second packet is forwarded without checking the route table.
Answer: D

Juniper   JN0-730 practice test   JN0-730   JN0-730 braindump

NO.7 A ScreenOS firewall has one interface in the user zone and one interface in the servers zone.
Both interfaces are addressed and active.
The configured policy allows user traffic from the user zone to the FTP server in the servers zone,
but the traffic does not cross the firewall from the client to the server.
What is the most likely problem with the firewall?
A. The ScreenOS firewall has no physical connection to the FTP server.
B. The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C. The ScreenOS firewall does not have a route defined to the FTP server's subnet.
D. The ScreenOS firewall does not have a route defined to the FTP client's subnet.
Answer: C

Juniper   JN0-730 study guide   JN0-730   JN0-730 study guide   JN0-730 answers real questions

NO.8 When is NAT used?
A. for Layer 2 switching
B. for MPLS VPNs
C. to translate between IP addresses
D. for secure tunnels
Answer: B

Juniper   JN0-730 certification   JN0-730 certification   JN0-730 test answers   JN0-730

NO.9 What is the initial default username and password for all ScreenOS devices?
A. administrator/password
B. root/password
C. netscreen/netscreen
D. admin/netscreen1
Answer: D

Juniper questions   JN0-730 exam prep   JN0-730 braindump

NO.10 What is a zone used for?
A. to bundle interfaces together for redundancy
B. to bundle interfaces sharing identical security requirements
C. to provide a tunneled connection across a network
D. to protect against spam attacks
Answer: D

Juniper test   JN0-730 certification training   JN0-730   JN0-730 exam simulations

NO.11 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A. ROM
B. NVRAM
C. TFTP server
D. Internal Flash
E. PCMCIA Card
Answer: D

Juniper exam   JN0-730 pdf   JN0-730 practice test   JN0-730

NO.12 Which security feature provides secure tunnels across a public network?
A. dynamic routing
B. Web filtering
C. IPsec
D. firewall filters
Answer: A

Juniper   JN0-730   JN0-730 pdf   JN0-730 study guide

NO.13 Using the CLI, if the startup copy of the ScreenOS on a NS-204 is corrupted, from which two (2)
alternate locations can an image be loaded?
A. ROM
B. TFTP server
C. Internal Flash
D. PCMCIA Card
E. Compact Flash Card
Answer: B,E

Juniper   JN0-730   JN0-730 exam prep   JN0-730

NO.14 Using the CLI, if the startup copy of the ScreenOS is corrupted, from which location can an
image be loaded?
A. TFTP server
B. internal flash
C. PCMCIA card
D. Compact Flash Card
Answer: A

Juniper   JN0-730   JN0-730 certification training   JN0-730 exam simulations   JN0-730

NO.15 Which two devices run ScreenOS software? (Choose two.)
A. NetScreen-5200
B. NetScreen-5400
C. SRX240
D. MX480
Answer: C,D

Juniper exam simulations   JN0-730   JN0-730   JN0-730

ITCertKing offer the latest C-TSCM62-65 exam material and high-quality 70-331 pdf questions & answers. Our 70-583 VCE testing engine and VCP-510 study guide can help you pass the real exam. High-quality HP2-N42 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-730_exam.html

The Best ISM 630-006 exam practice questions and answers

What are you waiting for? Opportunity knocks but once. You can get ISM 630-006 complete as long as you enter ITCertKing website. You find the best 630-006 exam training materials, with our exam questions and answers, you will pass the exam.

Life is full of choices. Selection does not necessarily bring you happiness, but to give you absolute opportunity. Once missed selection can only regret. ITCertKing's ISM 630-006 exam training materials are necessary to every IT person. With this materials, all of the problems about the ISM 630-006 will be solved. ITCertKing's ISM 630-006 exam training materials have wide coverage, and update speed. This is the most comprehensive training materials. With it, all the IT certifications need not fear, because you will pass the exam.

Exam Code: 630-006
Exam Name: ISM (C.P.M. Module 2: Supply Environment)
One year free update, No help, Full refund!
Total Q&A: 285 Questions and Answers
Last Update: 2013-09-30

Using ITCertKing you can pass the ISM 630-006 exam easily. The first time you try to participate in ISM 630-006 exam, selecting ITCertKing's ISM 630-006 training tools and downloading ISM 630-006 practice questions and answers will increase your confidence of passing the exam and will effectively help you pass the exam. Other online websites also provide training tools about ISM certification 630-006 exam, but the quality of our products is very good. Our practice questions and answers have high accuracy. Our training materials have wide coverage of the content of the examination and constantly update and compile. ITCertKing can provide you with a very high accuracy of exam preparation. Selecting ITCertKing can save you a lot of time, so that you can get the ISM 630-006 certification earlier to allow you to become a ISM IT professionals.

Having a ISM 630-006 certification can enhance your employment prospects,and then you can have a lot of good jobs. ITCertKing is a website very suitable to candidates who participate in the ISM certification 630-006 exam. ITCertKing can not only provide all the information related to the ISM certification 630-006 exam for the candidates, but also provide a good learning opportunity for them. ITCertKing be able to help you pass ISM certification 630-006 exam successfully.

When you're in pain, it is best to learn things. Learning will make you invincible. ITCertKing ISM 630-006 exam training materials can also help you to be invincible. With this training materials, you will receive the ISM 630-006 certification which recognized and accepted internationally. Then all of your life, including money and position, will improve a lot. Until then, will you still feel painful? No, you will be very happy. You should thanks ITCertKing which provide you with a good training materials. It can help you when you lost, and let you not only improve your own quality, but also demonstratethe value of your perfect life.

630-006 Free Demo Download: http://www.itcertking.com/630-006_exam.html

NO.1 Which of the following tools are MOST important for achieving continuous improvements in an
organization's integration with its supplier?
A. Quality inspection at the plant
B. Involvement in product design
C. Suppliers input in forms design
D. Joint examination of costs structure
Answer: B

ISM answers real questions   630-006 exam dumps   630-006 test   630-006 original questions   630-006

NO.2 You work as a buyer at KillTest .com. You are curious about the disadvantaged ownership of one of the
companies that supply materials for KillTest .com. When, if ever, can you ask the supplier for this
information?
A. At any time
B. Only when the buyer is purposefully seeking a minority supplier
C. Only when authorized by the courts
D. At no time
Answer: A

ISM   630-006 pdf   630-006 certification training   630-006 exam dumps

NO.3 Which of the following phrases are used to refer to the receipt of a functional acknowledgment after
sending a purchase order via EDI?
A. transmission received B. accepted purchase order
C. valid contract exists D. goods have been shipped
Answer: A

ISM   630-006   630-006 practice test

NO.4 .Which of the following BEST defines negotiations?
A. reaching an agreement through discussion
B. maximizing one's position over one's opponent
C. reaching an agreement through competitive bidding
D. ensuring that the terms and conditions of a contract are met
Answer: A

ISM exam prep   630-006   630-006 exam simulations

NO.5 Which software type is BEST applicable when using in the analysis of a competitive bid?
A. Application
B. Interface
C. Scientific
D. Operating system
Answer: A

ISM dumps   630-006   630-006

NO.6 In a situation where the purchasing and production departments share responsibility for product
fabrication, lead time for delivery of material, work schedules, and selection of sources of supply. Which
responsibilities would be allocated to the production department? (Choose two.)
A. product fabrication
B. lead time for delivery of material
C. work schedules
D. selection of sources of supply
Answer: A, C

ISM   630-006   630-006 test questions

NO.7 If a supplier's level of quality was unsatisfactory on past orders and the level of quality on current
orders is critical, which of the following options would be the BEST way to handle the situation?
A. Timely inspection by the buyer's company at the supplier's plant
B. Requiring the supplier to supply extra products to cover rejects
C. Require 100% inspection before the products leave the warehouse of the order by the buyer's
company's quality control department
D. Label "Quality of Material is Critical" on the purchase order
Answer: A

ISM test questions   630-006   630-006   630-006

NO.8 If a manufacturer establishes all the population needed for a round-bar machining process being 5.76
centimeters, with a standard deviation of 15. The acceptable quality limits are estimated at about 3
standard deviations. On day one, the sample means are taken by the operator, 5.80, 5.46, and 6.20
centimeters. These means indicate if the process is
A. controlled
B. reckless
C. statistically perfect
D. leaning towards the lower side of the mean
Answer: A

ISM   630-006   630-006 pdf   630-006   630-006 questions   630-006

NO.9 Which of the following factors are causing growth in complexity of much procurements leading to an
increased trend towards:
A. suppliers partnering
B. cross-functional teams
C. risk factor management
D. strategic supplier alliances
Answer: B

ISM   630-006   630-006 study guide   630-006 practice test   630-006 answers real questions

NO.10 Which of the following procedures for dealing with businesses that have social or economical
disadvantages, if a purchasing manager considers: (Choose all that apply)
A. That the staff of such businesses may have had limited exposure to technical contract language
B. That exceptions may be needed to accommodate faster payment of invoices from such businesses
C. That goods or services of lower than usual quality may be accepted from such businesses
D. That such businesses may need information on the bidding process
Answer: A, C, D

ISM certification training   630-006 certification training   630-006 certification training   630-006

NO.11 Which of the following terms is NOT associated with the Internet?
A. Browsers
B. Home pages
C. Web sites
D. Time sharing
Answer: D

ISM demo   630-006   630-006 study guide

NO.12 Which of the following approaches focuses on cooperative rather than adversarial relationships with
suppliers?
A. single sourcing
B. cross-functional teams
C. supply base management
D. supplier partnerships
Answer: D

ISM braindump   630-006   630-006

NO.13 When developing a new product with a supplier, which of the following documents protects a company
from information leaks?
A. Copyright
B. Patent
C. Supplier partnership
D. Confidentiality agreement
Answer: D

ISM exam dumps   630-006   630-006

NO.14 With regard to decision-making capability of cross-functional sourcing teams which of the following is
TRUE?
A. Better decisions than individuals.
B. Quick decisions than individuals.
C. Requiring the input of suppliers.
D. Poor substitute for individual decisions.
Answer: A

ISM test   630-006 dumps   630-006 pdf

NO.15 With which of the following would purchasing management be MOST concerned in day-to-day
operational control in a manufacturing firm?
A. labor utilization variance
B. materials utilization variance
C. labor cost variance
D. materials cost variance
Answer: D

ISM braindump   630-006 braindump   630-006   630-006 original questions   630-006

NO.16 Which statement about setting negotiating objectives is FALSE?
A. It should be defined with sufficient specificity to permit measurements.
B. It should be established for each issue or condition to be negotiated.
C. They should establish a supplier's strengths and avoid reference to its weaknesses.
D. It should be based on databases derived from cooperative efforts of purchasing,
production, and engineering.
Answer: C

ISM   630-006 exam simulations   630-006 original questions   630-006 demo   630-006 test answers

NO.17 If a purchasing manager is represented by buying an organization in a meeting with a governmental
body. The manager could possibly embark in the following:
A. explaining the organization's new MRP system
B. promoting the business to other participants
C. negotiating for the buying organization
D. discussing the advantages and disadvantages of various types of contractual arrangements
Answer: C

ISM test   630-006 exam prep   630-006 exam   630-006 exam dumps   630-006 demo   630-006

NO.18 You work as a buyer at KillTest .com. A piece of capital equipment is designed and specified so as to
force the purchasing department into a sole supplier situation. You still want to affect the procurement
process. Which of the following support items from the sole supplier would you negotiate? (Choose all
that apply)
A. Technical documentation, including data sheets, performance specs, maintenance and operating
manuals, supplier-furnished training programs, and full supplier documentation
B. The initial provisioning of high-risk spare parts for start-up and a one-year period thereafter
C. A promise to maintain equipment on an annual basis by the manufacturer or its authorized service
agent
D. A determination of whether equipment or services are taxable or tax-exempt
Answer: A, B, C

ISM   630-006   630-006 demo   630-006 practice test   630-006

NO.19 Which of the following options are key actions that senior management should take into account when
establishing a purchasing department?
A. Select a purchasing system
B. Develop list of suppliers
C. Hire qualified buyers
D. Establish a policies authorizing purchasing authority
Answer: D

ISM braindump   630-006 exam   630-006 demo   630-006 study guide   630-006 questions

NO.20 Choose two of the following options that are usually amongst the functions of the material manager of?
(Choose two)
A. Stores and receiving
B. Quality control
C. Traffic management
D. Accounts payable
Answer: A, C

ISM   630-006 test answers   630-006 test answers   630-006 practice test

ITCertKing offer the latest NS0-504 exam material and high-quality MB5-700 pdf questions & answers. Our C_TFIN52_64 VCE testing engine and 70-483 study guide can help you pass the real exam. High-quality 000-N45 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/630-006_exam.html